Grandstream Networks GXV3275 Administration Manual page 66

PC Port Priority Value
PC Port Mode
HTTP/HTTPS User-Agent
SIP User-Agent
802.1x mode
802.1x Identity
802.1x Secret
802.1x Private Key
Password
CA Certificate
Client Certificate
Private Key
HTTP/HTTPS Proxy
Hostname
HTTP/HTTPS Proxy Port
Bypass Proxy For
tag value on the target address received from the LAN port of the phone then sends
the value to the device connected to the PC port.
Note:
VLAN tag value on the device connected to the PC port should be the same as the
VLAN tag value assigned to the PC port here.
Determines the Priority Code Point within a Layer 2 frame header for PC port.
Enables and defines the PC port mode. If it is set to "Mirrored", the traffic in the
LAN port will go through PC port as well and packets can be captured by connecting
a PC to the PC port. The default setting is "Enabled".
Sets the user-agent for phonebook and screen saver.
Sets the user-agent for SIP.
Enables and selects the 802.1x mode for the phone system. The supported 802.1x
modes are, the default setting is "Disable":

EAP-MD5

EAP-TLS

EAP-PEAP
Enters the identity information for the selected 802.1x mode. (This setting will be
displayed only if 802.1 X mode is enabled).
Enters the secret for the 802.1x mode. This option will be appeared when 802.1x
mode is EAP-MD5 or EAP-PEAP.
Enters the password for the selected 802.1x mode. (This setting will be displayed
only if the 802.1 X mode is enabled).
Uploads the CA Certificate file to the phone.(This setting will be displayed only if
the 802.1 X mode is enabled)
Loads the Client Certificate file to the phone. (This setting will be displayed only if
the 802.1 X TLS mode is enabled)
Loads the private key file to the phone. (This setting will be displayed only if the
802.1 X TLS mode is enabled)
Configures the HTTP/HTTPS proxy URI of the network. Some of networks requires
to go through a proxy to access to the Internet. The default setting is keeping this
field blank.
Configures the HTTP/HTTPS proxy port number of the network. Some of networks
requires to go through a proxy to access to the Internet. The default setting is
keeping this field blank.
Defines the specific URI that the phone can directly access to without HTTP/HTTPS
proxy. If it is filled, the phone will bypass the proxy to send the packets to the
specific URI. The default setting is keeping this filed blank.
GXV3275 Administration Guide
P a g e | 66