Phone Setup; Connecting The Phone - Grandstream Networks GXP2135 Quick Installation Manual

PHONE SETUP:

PC LAN DC12 HEADSET HANDSET
Installing the phone (Wall Mount):
1. Attach the wall mount spacers to the slot or wall mount spacers on the back
of the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab rom the handset cradle (See gure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the
handset while the phone is mounted on the wall (See gure below).
3
Slots for the
wall mount and
phone stand
Handset Rest
Tab with extension up
Tab with extension down
Installing the phone (Phone Stand) :
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom o the phone where there is a slot or the phone stand. (Upper hal,
bottom part).

CONNECTING THE PHONE:

PC LAN DC12 HEADSET
PC Port LAN Port Power Headset Port Handset Port
To setup the GXP2135, ollow the steps below:
1. Connect the handset and main phone case with the phone cord.
2. Connect the LAN port o the phone to the RJ-45 socket o a hub/switch or a
router (LAN side o the router) using the Ethernet cable.
3. Connect the 12V DC output plug to the power jack on the phone; plug the power
adapter into an electrical outlet.
4. The LCD will display provisioning or rmware upgrade inormation. Beore con-
tinuing, please wait or the date/time display to show up.
5. Using the phone embedded web server or keypad conguration menu, you can
urther congure the phone using either a static IP or DHCP.
HANDSET
4