Table of Contents
Advertisement
Remove the GPU riser board.
9.
To replace the component, reverse the removal procedure.
Two-slot PCIe riser board
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
If installed, remove the security bezel (on page 25).
1.
Power down the server (on page 25).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
Extend the server from the rack (on page 25).
o
Remove the server from the rack (on page 27).
o
Remove the access panel (on page 28).
5.
Disconnect any internal cables that are connected to the expansion board.
6.
Removal and replacement procedures 55
Advertisement
Table of Contents
