Pcie/Flexiblelom Riser Options - HPE ProLiant XL230a Gen9 User Manual

Using a T-10 Torx screwdriver, install the I/O module FlexibleLOM adapter and the support arm.
5.
Install the I/O module.
6.
Install the server into the chassis
7.
Connect all peripheral cables to the server.
8.
Press the Power On/Standby button.
9.
The server exits standby mode and applies full power to the system. The system power LED
changes from amber to green.

PCIe/FlexibleLOM riser options

I/O modules are specific to each server and are installed in the rear of the chassis. For more information
about product features, specifications, options, configurations, and compatibility, see the product
QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
To install the component:
Power down the server associated with the I/O module
1.
Remove the server associated with the I/O module
2.
("Install the server" on page 18).
("Power down the
("Remove the
server" on page 15).
server" on page 16).
Hardware options installation 32