Table of Contents
Advertisement
Install the cover on the PCIe/FlexibleLOM I/O module.
7.
Install the I/O module.
8.
Install the server into the chassis
9.
Connect all peripheral cables to the server.
10.
Press the Power On/Standby button.
11.
The server exits standby mode and applies full power to the system. The system power LED
changes from amber to green.
HPE Ethernet Dual 1Gb 1-port 364i Adapter option
I/O modules are specific to each server and are installed in the rear of the chassis. For more information
about product features, specifications, options, configurations, and compatibility, see the product
QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
To install the component:
Power down the server associated with the I/O module
1.
("Install the
server" on page 18).
("Power down the
server" on page 15).
Hardware options installation 36
Advertisement
Table of Contents
