If the glass gasket requires replacement use
a tadpole glass gasket for the Flush Front (Part
# 936-155).
DOOR GLASS
Your Regency
fireplace is supplied with high
®
temperature, 5 mm Neoceram ceramic glass that
will withstand the highest heat that your unit will
produce. If your glass requires cleaning, we
recommend using an approved glass cleaner
available at all authorized dealers. Do not use
abrasive materials. Do not clean the glass
when hot.
In the event that you break your glass by impact,
purchase your replacement from an authorized
Regency
dealer only, and follow our step-by-
®
step instructions for replacement.
the glass panels should be done
by a licensed or qualified service
person.
Caution: Wear gloves when removing
damaged or broken glass.
WARNING: Do not operate the appli-
ance with the glass panels removed,
cracked or broken. Replacement of
Flush Glass Replacement
Remove the flush door front. Remove the 4
glass clips from each corner. Slide in the new
replacement glass. Push the 4 glass clips
back onto the frame. The glass must have
gasketing around it.
Bay Glass Replacement
1) Remove the door from the unit and place
on a soft surface to prevent scratching.
Regency® P33E-10 Zero Clearance Direct Vent Gas Fireplace
maintenance
|
51
|
51