Because of the extreme heat this fireplace emits, the mantel clearances are critical.
Combustible mantel clearances from top of unit are shown in the diagram below.
Note: A non-combustible mantel may be installed at a lower height if the framing is made of metal studs covered with a non-combustible board.
Note: Mantel starts at *1" deep and end at *12" deep. **For Vignette with Vignette Finishing Trim flush finish, all materials (framing & finishing) below the
mantel and the width of the trim (34- 1/16") must be non-combustible if a lower mantel is desired.
Note: Ensure the paint that is used on the mantel and the facing is "heat resistant" or the paint may discolour.
MANTEL CLEARANCES WITH
VIGNETTE ONLY (No Vignette Finishing Trim)
MANTEL CLEARANCES WITH
VIGNETTE + VIGNETTE FINISHING TRIM
FLUSH FINISH
12 |
Regency® P33E-10 Zero Clearance Direct Vent Gas Fireplace