Installation Workflow - Nomadix AG-2000W User Manual

N AG-2000 ™ / AG-2000
OMADIX W

Installation Workflow

This Installation Workflow illustrates the steps that are required to install and
configure the AG-2000w successfully. Review this flowchart before attempting to
install the AG-2000w on the customer's network.
Place the AG-2000w on a flat and stable work surface and connect the power cord.
Start a Telnet session to communicate with the AG-2000w via the product's
IP address (172.30.30.172) or its default DHCP address.
Establish your AG-2000w's start-up configuration settings.
When prompted, accept to the Nomadix End User License Agreement (EULA). You must
accept the EULA before the AG-2000w can connect with the Nomadix License Key Server.
When the key is successfully received from the server, your AG-2000w will reboot.
Network
Log in to the AG-2000w and use the graphical Web Management Interface
(WMI) to configure the product's features. You have now established a basic
configuration for the AG-2000w that enables "Plug and Play" Internet
Export your configuration settings to an archive file.
Installing the AG-2000w
™
WA
Connect the AG-2000w to a "live" network.
Log in to the Command Line Interface.
connectivity.
39