Nomadix AG-2000W User Manual page 136

Define a "label" for this billing plan in the
4.
Each plan must have a unique label, different from other plans.
Enter a description for this billing plan in the
5.
Define the
6. Pricing
day, per week, and per month).
Define the (to network) and
7. Up
billing plan.
Define the DHCP Pool (public or private) -- see following note.
8.
The "public" option requires IP Upsell to be turned on, otherwise
subscribers will receive private IP addresses.
Define the
9. Time Unit
Month). One time unit is assigned to each billing plan.
The AG-2000w allows you to define multiple billing plans with different
time units at the same time. For example, you can define one billing
plan that changes by the hour (e.g. $2.95 per hour) and a second plan
that charges per day (e.g. $12.95 per day).
The ICC is limited to one simultaneous time unit.
Click on the
10. Submit
or click on the
state.
Click on the
11. Back
Setup (previous) screen.
Repeat Steps 2 through 11 for each billing plan. You can enable (make active)
12.
any or all of the available billing plans.
Define the messages you want to present to subscribers, including:
13.
Introduction Message
Offer Message
Policy Message
Define the
14. Units of Access
make available to subscribers.
132
N
schemes for this billing plan (rate per minute, per hour, per
(to subscribers) bandwidth range for this
Down
of the billable event (either Minute, Hour, Day, Week, or
button to save your changes and establish this billing plan,
button if you want to reset all the values to their previous
Reset
button at any time to return to the Internal Billing Options
(Minute, Hour, Day, Week, or Month) you want to
AG-2000 ™ / AG-2000
OMADIX W
field.
Label
Description of Service
System Administration
™
WA
field.