Nomadix AG-2000W User Manual page 76

Blocking or unblocking interface access will terminate the current
session.
Do not enable the blocking of all interfaces without setting up and
enabling SNMP. Enabling the blocking of all interfaces and disabling
SNMP will completely block access to the AG-2000w administration
interface. For assistance, contact Nomadix Technical Support.
Click the check box for
3.
click on the
Submit
If you enabled Access Control, administrator access is restricted only to the IP
addresses shown under the "Currently Access is Permitted for IPs" listing. If you
want to add to or remove IP addresses from the list, go to Step 4 through Step 8.
The Access Control list can contain up to 50 (fifty) valid administrator
IP addresses or up to 50 (fifty) ranges of IP addresses.
To add an IP address (or range of IP addresses) to the list, enter the "starting" IP
4.
address in the
Access Control Start IP
If you are adding a range of IP addresses to the access control list, you must now
5.
enter the "ending" IP address in the
adding a single IP address, enter
Click on the
6. Add
list.
To remove an IP address (or range of IP addresses) from the list, enter the
7.
"starting" IP address in the
If you are removing a range of IP addresses from the access control list, you must
now enter the "ending" IP address in the
removing a single IP address, enter
Click on the
8. Remove
from the list.
If you enabled Access Control and have "locked yourself out," of the
system (for example, because you've forgotten your password), you
must disable the Access Control feature from the Command Line
Interface, or change the range of allowed IP addresses to access the
management interfaces. If necessary, contact Nomadix Technical
Support. Go to
72
N
OMADIX
if you want to enable this feature, then
Access Control
button to save your change.
field.
Access Control End IP
in the
None
button to add the IP address (or range of IP addresses) to the
Access Control Start IP
Access Control End IP
None
button to remove the IP address (or range of IP addresses)
"Contact Information" on page
AG-2000 ™ / AG-2000
W
field. If you are
Access Control End IP
field.
field. If you are
in the
Access Control End IP
227.
System Administration
™
WA
field.
field.