Establishing Secure Administration {Access Control - Nomadix AG-2000W User Manual

N AG-2000 ™ / AG-2000
OMADIX W

Establishing Secure Administration {Access Control}

The AG-2000w allows you to block administrator access to interfaces (Telnet, WMI
and FTP) and incorporates a master access control list that checks the source (IP
address) of administrator logins. A login is permitted only to the interfaces that have
not been blocked, and only if a match is made with the master "Source IP" list
contained on the AG-2000w. If a match is not made with the "Source IP list," the
login is denied, even if a correct login name and password are supplied. The access
control list for source IPs supports up to 50 (fifty) entries in the form of a specific IP
address or range of IP addresses.
This procedure allows you to enable the "Access Control" feature and block
administrator access to specific interfaces, and add or remove administrator "Source
IP" addresses.
From the Web Management Interface, click on
1.
Control.
The Access Control screen appears:
Enable or disable administrator access to any of the following interfaces:
2.
Telnet
Web Management
FTP
System Administration
™
WA
Configuration
, then
Access
71