N
AG-2000
™ / AG-2000
OMADIX
W
Enter the SNMP parameters (communities and identifiers), including:
3.
System Contact
System Location
Get (Read) Community
Set (Write) Community
Trap Community
Trap Recipient IP
Your SNMP manager needs this information to enable network management over
the Internet.
When finished, you must reboot the system for the new settings to take effect.
4.
Click on the check box for
system after saving your changes.
Click on the
5.
Submit
on the
button if you want to reset all the values to their previous state.
Reset
You can now use your SNMP client to manage the AG-2000w via the Internet.
System Administration
™
WA
Reboot after changes are saved?
button to save your changes and reboot the system, or click
to reboot the
103