Nomadix AG-2000W User Manual page 84

2. DHCP Services
all your DHCP services.
By default, the AG-2000w is configured to act as its own DHCP server
and the relay feature is "disabled." If you want the AG-2000w to act as
its own DHCP server, do not enable the relay. Go directly to Step 8.
To route DHCP through an external server, enable the
3.
If you enabled the DHCP Relay feature, you must assign a valid
4.
address (the default is 0.0.0.0) and a valid
The DHCP Relay Agent allows the AG-2000w to request a specific range of IP
addresses from different IP pools from the DHCP Server. Leaving these fields
blank forces the system to use the IP pool that contains IP addresses that are on
the same subnet as the AG-2000w.
You must disable the DHCP server before enabling the DHCP relay.
Both features cannot be enabled concurrently.
If the DHCP Relay Agent IP address is set for an address that is already
used or the IP address of the server, the other system will get an IP
conflict and will not have Internet access.
If you want the AG-2000w to act as its own
5.
the DHCP Relay), enable it now.
If required, enable the
6.
System administrators can set two different DHCP pools for the same physical
LAN. When DHCP subscribers select a service plan with a public pool address,
the AG-2000w associates their MAC address with their public IP address for the
duration of the service level agreement. The opposite is true if they select a plan
with a private pool address. This feature enables a competitive solution and is an
instant revenue generator for ISPs. The IP Upsell functionality solves a number
of connectivity problems, especially with regard to L2TP and certain video
conferencing and online gaming applications.
80
N
OMADIX
is enabled by default. Do not disable it unless you want to lose
feature.
IP Upsell
AG-2000 ™ / AG-2000
W
DHCP Relay
DHCP Server IP
address.
DHCP Relay Agent IP
(you did not enable
DHCP Server
System Administration
™
WA
.