N
AG-2000
™ / AG-2000
OMADIX
W
Deleting an ARP Table Entry {ARP Delete}
ARP (Address Resolution Protocol) is used to dynamically bind a high level IP
address to a low level physical hardware (MAC) address. ARP is limited to a single
physical network that supports hardware broadcasting. This procedure shows you
how to delete an ARP table entry.
From the Web Management Interface, click on
1.
The Delete ARP Table Entries screen appears:
Enter the
2.
IP address
Click on the
3.
Delete
want to reset the "IP Address" value to its blank state.
System Administration
™
WA
of the entry you want to delete.
button to delete this entry, or click on the
, then
System
ARP Delete.
button if you
Reset
153