Defining Automatic Configuration Settings {Auto Configuration - Nomadix AG-2000W User Manual

N AG-2000 ™ / AG-2000
OMADIX W

Defining Automatic Configuration Settings {Auto Configuration}

The AG-2000w allows you to define parameters to enable the automatic
configuration of the system. See also:
page 23.
From the Web Management Interface, click on
1.
Configuration.
The Autoconfiguration Settings screen appears:
Enable or disable
2.
If you enabled Autoconfiguration, you must enter the following information into
3.
the corresponding fields:
RADIUS Authentication Name
Radius Password
Confirm Password
Click on the check box for
4.
system when you submit your changes.
Click on the
5. Submit
reset all data to its previous state.
System Administration
™
WA
"RADIUS-driven Auto Configuration" on
, as required.
Autoconfiguration
Reboot after changes are saved?
button to save your changes, or click or the
, then
Configuration Auto
to reboot the
Reset
button to
73