Nomadix AG-2000W User Manual page 172

Enter the
3. Internal Port
Enter a valid
4. MAC Address
Enter the
5. External IP Address
The External IP address field will default to the IP address of the AG-
2000w.
Enter the
6. External Port
Optional: Enter the
7.
to connect to the internal device from any network-side workstation.
Optional: Enter the
8.
want to connect to the device from any TCP/UDP port of a network-side
workstation.
Select the protocol (
9.
Click on the
10. Add
reset all values to their previous state.
For more information about Static Port-Mapping, see also:
"Displaying the Static Port Mapping Table {Static Port-Mapping}" on
page 115.
"Deleting Static Ports {Static Port-mapping Delete}" on page
168
N
OMADIX
reference.
.
.
reference.
. Leave this field set to zero if you want
Remote IP Address
reference. Leave this field set to zero if you
Remote Port
or ) from the pull-down menu.
TCP UDP
button to add this static port, or click on the
AG-2000 ™ / AG-2000
W
button to
Reset
169.
System Administration
™
WA