Nomadix AG-2000W User Manual page 58

When assigning a DHCP Relay Agent IP address for the DHCP Relay,
ensure that the IP address you use does not conflict with devices on the
network side of the AG-2000w.
Although you cannot enable the DHCP relay and the DHCP service at
the same time, it is possible to "disable" both functions from the
Command Line Interface. In this case, a warning message informs you
that no DHCP services are available to subscribers.
Follow the on-screen instructions to set up your DHCP options. For example:
3.
S S
AMPLE CREEN
Configuration>dh
Enable/Disable IP Upsell
Enable/Disable DHCP Relay
Enable/Disable DHCP Server
Enter external Subnet-based DHCP Service
IP Upsell
DHCP Relay
External DHCP Server IP
DHCP Relay Agent IP
DHCP Server
DHCP Server Subnet-based
Server-IP
208.11.0.4 255.255.0.0
10.0.0.4
* Default IP Pool
DHCP IP Pools Configuration:
0 - Show IP Pools
1 - Add a new IP Pool
2 - Modify an IP Pool
3 - Remove an IP Pool
4 - Exit this menu
Select the DHCP Pool configuration mode
After setting up your DHCP options, the system must be rebooted for
your changes to take effect.
54
N
R
ESPONSE
[disabled
[disabled
[enabled
Disabled
Disabled
0.0.0.0
0.0.0.0
Enabled
Disabled
Server-Netmask Start-IP
208.11.0.5 208.11.0.7 20
255.255.255.0 10.0.0.5
AG-2000 ™ / AG-2000
OMADIX W
]:
]:
]:
[disabled
End-IP Lease Type IPUp
PRIV NO
10.0.0.250 30 PRIV NO *
[0]:
Installing the AG-2000w
™
WA
]: