Contact Information For Customer Queries - Hartmann Tensoval Instructions For Use Manual

leak tightness of the pressure
system and possible deviations of
the pressure reading.
Remove at least one battery in
order to switch to calibration mode.
Hold down on the START/STOP but-
ton and then insert the battery.
Release the button and, after a few
moments, two zeros will appear
one above each other on the dis-
play.
Instructions on the measurement
function check will be supplied on
request to competent authorities or
authorised maintenance providers
by HARTMANN.
15.2 Contact information for
customer queries
AE – PAUL HARTMANN
Middle East FZE
Dubai
AU – PAUL HARTMANN Pty. Ltd.
P.O. Box 6427
Silverwater N.S.W. 2128
HK – PAUL HARTMANN
Asia-Pacific Ltd.
Hong Kong
ZA – HARTMANN-Vitamed (Pty) Ltd.
2162 Johannesburg
Date of revision of the text: 2009-12
103
English