Contact Information For Customer Queries - Hartmann Tensoval duo control Instructions For Use Manual

Instructions for the measure-
ment function check:
A device function check can be car-
ried out on people or using a suita-
ble simulator. Measurement func-
tion check involves testing for leak
tightness of the pressure system
and possible deviations of the pres-
sure reading.
Remove at least one battery in
order to switch to calibration mode.
Hold down on the START/STOP but-
ton and then insert the battery.
Release the button and, after a few
moments, two zeros will appear
one above each other on the dis-
play.
Instructions on the measurement
function check will be supplied on
request to competent authorities or
authorised maintenance providers
by HARTMANN.
15.2 Contact information for
customer queries
AE – PAUL HARTMANN
Middle East FZE
Dubai
AU– PAUL HARTMANN Pty. Ltd.
Homebush NSW 2140
HK – PAUL HARTMANN
Asia-Pacific Ltd.
Hong Kong
ZA – HARTMANN South Africa
2194 Johannesburg
Date of revision of the text:
2009-12
145
English