Boot Configuration - Silicon Graphics Rackable C2108-TY10 User Manual

Boot Configuration

007-5688-003
This feature indicates if a supervisor's password has been entered (installed).
User Password
This feature indicates if a user's password has been entered (installed).
Change Supervisor Password
Select this option and press <Enter> to access the submenu, and then enter the password.
Change User Password
Select this option and press <Enter> to access the submenu, and then enter the password.
Clear User Password
Note: Available only if User Password has been set.
This item allows you to clear a user password after it has been entered.
Password Check
This item allows you to check a password after it has been entered. The options are Setup and
Always.
Boot Sector Virus Protection
When Enabled, the AMI BIOS displays a warning when any program (or virus) issues a Disk
Format command or attempts to write to the boot sector of the hard disk drive. The options are
Enabled and Disabled.
Use this feature to configure boot settings (see Figure 7-4).
Boot Configuration
89