General Safety Precautions; Figure 4-1 Installing The Onboard Battery - Silicon Graphics Rackable C2108-TY10 User Manual

4: System Safety
!
!

General Safety Precautions

24
• Serverboard Battery
Caution: There is a danger of explosion if the onboard battery is installed upside down,
which will reverse its polarites (see
same or an equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
• DVD-ROM Laser
Caution: This server may have come equipped with a DVD-ROM drive. To prevent direct
exposure to the laser beam and hazardous radiation exposure, do not open the enclosure or
use the unit in any unconventional way.
• Mainboard replaceable soldered-in fuses: Self-resetting PTC (Positive Temperature Coefficient)
fuses on the mainboard must be replaced by trained service technicians only. The new fuse must
be the same or equivalent as the one replaced. Contact technical support for details and support.
Lithium battery
Battery holder
Figure 4-1 Installing the Onboard Battery
Follow these rules to ensure general safety:
• Keep the area around the SGI Rackable C2108-TY10 system clean and free of clutter.
• The SGI Rackable C2108-TY10 system weighs approximately 57 lbs (25.9 kg.) when fully
loaded. When lifting the system, two people at either end should lift slowly with their feet
spread out to distribute the weight. Always keep your back straight and lift with your legs.
Figure 4-1). This battery must be replaced only with the
007-5688-003