Acpi Configuration; Acpi Version Features; Acpi Apic Support - Silicon Graphics Rackable C2108-TY10 User Manual

ACPI Configuration

ACPI Version Features

ACPI APIC Support

007-5688-003
The system temperature will be displayed (in degrees in Celsius and Fahrenheit) as it is detected
by the BIOS.
Fan Speed Readings
This feature displays the fan speed readings from Fan1 through Fan8.
Fan Speed Control Monitor
This feature allows the user to decide how the system controls the speeds of the onboard fans. The
CPU temperature and the fan speed are correlative. When the CPU on-die temperature increases,
the fan speed will also increase, and vice versa. Select Workstation if your system is used as a
Workstation. Select Server if your system is used as a Server. Select "Disabled, (Full Speed
@12V)" to disable the fan speed control function and allow the onboard fans to constantly run at
the full speed (12V). The Options are: 1. Disabled (Full Speed), 2. Server Mode, 3. Workstation
Mode.
Voltages Readings
The following voltage readings will be displayed.
CPU1 Vcore, CPU2 Vcore, +5Vin, +12V, -12V 3.3Vcc (V), and Battery Voltage
Use this feature to confi gure Advanced Configuration and Power Interface (ACPI) power
management settings for your system.
The options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website for further
explanation: http://www.acpi.info/.
Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System Description
Table) pointer list. The options are Enabled and Disabled.
Advanced Setup Configurations
81