Table of Contents
Advertisement
Server Precautions
Rack Mounting Considerations
Ambient Operating Temperature
Reduced Airflow
Mechanical Loading
007-5688-003
•
Review the electrical and general safety precautions.
•
Determine the placement of each component in the rack before you install the rails.
•
Install the heaviest server components in the bottom of the rack first, and then work up.
•
Use a regulating uninterruptible power supply (UPS) to protect the server from power surges
and voltage spikes and to keep your system operating in case of a power failure.
•
Allow the hot-pluggable SAS/SATA drives and power supply modules to cool before
touching them.
•
Always keep the rack's front door and all panels and components on the servers closed when
not servicing to maintain proper cooling.
If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the rack
environment may be greater than the ambient temperature of the room. Therefore, consideration
should be given to installing the equipment in an environment compatible with the manufacturer's
maximum rated ambient temperature (
Equipment should be mounted into a rack so that the amount of airflow required for safe operation
is not compromised.
Equipment should be mounted into a rack so that a hazardous condition does not arise due to
uneven mechanical loading.
.
35º C or 95º F)
Rack Mounting Considerations
9
Advertisement
Table of Contents
