11) Seat - Can-Am DS 450 Series Operator's Manual

CONTROLS/INSTRUMENT/EQUIPMENTS

11) Seat

Seat Removal
Pull latch rearward while gently lifting
rear of seat.
vmo2009-023-002_c
1. Seat latch
Continue lifting movement until you
can release seat retaining devices,
then completely remove seat.
Seat Installation
Insert seat front upper slot into coolant
tank hook, then make sure seat middle
tab is well engaged. When seat rests
in its position, firmly push seat down to
latch.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
vmo2008-011-031_a
1. Upper slot
2. Middle tab
______________
62
WARNING
Make sure seat is securely latched
before riding.
Operator's Guide Location
A convenient location under the seat is
provided to stow the
GUIDE
. Secure it with the rubber
bands.
vmo2013-050_A
1. Seat
2. Rubber bands
OPERATOR'S