Client Mode - TP-Link TL-WR810N User Manual

AP. If you select Auto, then Router will choose the appropriate WDS Mode
automatically.
Wireless Security Mode - This option should be chosen according to the security

configuration of the AP you want to access. It is recommended that the security type is
the same as your AP's security type.
Wireless Password - If the AP your router is going to connect need password, you

need to fill the password in this blank.
2. Click Survey button on the Wireless page as shown in Figure 3-15, and then AP List page will
appear as shown in Figure 3-16. Find the SSID of the Access Point you want to access, and
click Connect in the corresponding row. For example, the third item is selected. The target
network's SSID will be automatically filled into the corresponding box which is shown as the
Figure 3-15.

Note:
If you know the SSID of the desired AP, you can also input it into the field "SSID" manually.
3. Click the Next button in Figure 3-15. You will see the Finish page as shown in Figure 3-17.
Click the Finish button to make your wireless configuration take effect and finish the Quick
Setup.

3.2.4 Client Mode

When you set the operation mode switch to Client, take the following steps:
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 3-16 AP List
Figure 3-17 Quick Setup - Finish
- 20 -