Wireless Advanced - TP-Link TL-WR810N User Manual

2. Select the radio button "Allow the stations specified by any enabled entries in the list to
access" for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
Click the Add New... button.
4.
Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field.
•
Enter wireless station A/B in the Description field.
•
Select Enabled in the Status pull-down list.
•
Click the Save button.
•
Click the Back button.
•
The filtering rules that configured should be similar to the following list:

6.6.4 Wireless Advanced

Choose menu "Wireless → Wireless Advanced", and then you can configure the advanced
settings of your wireless network.
Transmit Power - Here you can specify the transmit power of Router. You can select High,

Middle or Low which you would like. High is the default setting and is recommended.
Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.

The beacons are the packets sent by the Router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 6-13 Wireless Advanced
- 142 -