TP-Link TL-WR810N User Manual page 258

Description - This is the information about the rules such as address range.

Egress Bandwidth - This field displays the max and mix upload bandwidth through the WAN

port, the default is 0.
Ingress Bandwidth - This field displays the max and mix download bandwidth through the

WAN port, the default is 0.
Enable - This displays the status of the rule.

Modify - Click Modify to edit the rule. Click Delete to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.
Step 1: Click Add New... shown in Figure 8-73, you will see a new screen shown in Figure 8-74.
Step 2: Enter the information like the screen shown below.
 Enable - Enable or disable the rule.
 IP Range - Interior PC address range. If both are blank (or 0.0.0.0), the domain is no
effective.
 Port Range - The port range which the Interior PC access the outside PC. If all are blank
(or 0), the domain is no effective.
 Protocol - Transport layer protocol, here there are All, TCP, UDP.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 8-73 Bandwidth Control Rule List
Figure 8-74 Bandwidth Control Rule Settings
- 243 -