TP-Link TL-WR810N User Manual page 125

Disable Security - The wireless security function can be enabled or disabled. If disabled, the

wireless stations will be able to connect the Router without encryption. But it's strongly
recommended to choose one of the following modes to enable security.
WPA-PSK/WPA2-Personal - It's the WPA/WPA2 authentication type based on pre-shared

passphrase.
Version - you can choose the version of the WPA-PSK security on the drop-down list. The
•
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
•
either Automatic, or TKIP or AES as Encryption.

Note:
WPA/WPA2-Personal
If you check the
a notice in red as shown in Figure 5-13.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 5-12 Wireless Security
radio button and choose TKIP encryption, you will find
- 110 -