TP-Link TL-WR810N User Manual page 219


Note:
WPA/WPA2-Personal
If you check the
a notice in red as shown in Figure 8-17.
WPA /WPA2-Enterprise - It's based on Radius Server.

Version - you can choose the version of the WPA security from the pull-down list. The
•
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select Automatic, TKIP or AES.
•
Radius Server IP - Enter the IP address of the Radius server.
•
Radius Port - Enter the port that Radius server used.
•
Radius Password - Enter the password for the Radius server.
•
Group Key Update Period - Specify the group key update interval in seconds. The value
•
should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard.

Type - you can choose the type for the WEP security on the pull-down list. The default
•
setting is Automatic, which can select Shared Key or Open System authentication type
automatically based on the wireless station's capability and request.
WEP Key Format - Hexadecimal and ASCII formats are provided here
•
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.
WEP Key (Password) - Select which of the four keys will be used and enter the matching
•
WEP key that you create. Make sure these values are identical on all wireless stations in
your network.
Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
•
encryption. "Disabled" means this WEP key entry is invalid.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
radio button and choose TKIP encryption, you will find
Figure 8-17
- 204 -
.
Hexadecimal