TP-Link TL-WR810N User Manual page 195

Diagnostic Tool - Check the radio button to select one diagnostic tool.

Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to
•
a given host or gateway.
Traceroute - This diagnostic tool tests the performance of a connection.
•

Note:
You can use ping/traceroute to test both numeric IP address or domain name. If
pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain name is not,
you might have a name resolution problem. In this case, ensure that the domain name you are
specifying can be resolved by using Domain Name System (DNS) queries.
IP Address/Domain Name - Type the destination IP address (e.g. 202.108.22.5) or Domain

name (e.g.http://www.tp-link.com).
Pings Count - The number of Ping packets for a Ping connection. The default is 4.

Ping Packet Size - The size of Ping packet. The default is 64.

Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no reply in

the specified time, the connection is overtime. The default is 800.
Traceroute Max TTL - The max number of hops for a Traceroute connection. The default is

20.
Click Start to check the connectivity of the Internet.
The Diagnostic Results page displays the result of diagnosis.
If the result is similar to the following screen, the connectivity of the Internet is fine.

Note:
Only one user can use this tool at one time. Options "Number of Pings", "Ping Size" and "Ping
Timeout" are used for Ping function. Option "Tracert Hops" are used for Tracert function.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 7-27 Diagnostic Results
- 180 -