System Tools - TP-Link TL-WR810N User Manual

User Name - Type the user name that you want to give access to the USB drive. The

user name must be composed of alphanumeric symbols not exceeding 15 characters in
length.
Password - Enter the password in the Password field. The password must be composed

of alphanumeric symbols not exceeding 15 characters in length. For security purposes,
the password for each user account is not displayed.
Storage Authority – Choose Read and Write or Read Only from the drop-down list to

assign access authority of Storage Sharing to the user.
Save - You can click the Save button to save your settings.

Back - You can click the Back button to discard the settings and just go to the media

server configuration page.

Note:
Please restart the service for the new settings to take effect.
If you cannot use the new user name and password to access the shares, press Windows logo
+ R to open the Run dialog box and type net use \\192.168.0.254 /delete /yes and press Enter.
(192.168.0.254 is your router's LAN IP address. If the LAN IP of the modem connected with your
router is 192.168.1.x, the default LAN IP of the router will automatically switch from
192.168.0.254 to 192.168.1.254 to avoid IP conflict; in this case, please try net use
\\192.168.1.254 /delete / yes.)

5.10 System Tools

Figure 5-33 The System Tools menu
Choose menu "System Tools", and then you can see the submenus under the main menu:
Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot, Password,
and System Log. Click any of them, and you will be able to configure the corresponding function.
The detailed explanations for each submenu are provided below.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
- 125 -