Configuration For Client Router Mode - TP-Link TL-WR843N User Manual

PSK Password - You can enter ASCII or Hexadecimal characters.

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the
length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case keys
will affect the outcome. It would also be a good idea to write down the key and all
related wireless security settings.
No Change - If you chose this option, wireless security configuration will not change!

These settings are only for basic wireless parameters. For advanced settings, please refer to
4.7 Wireless.
Click the Next button. You will see the page as shown in Figure 3-14. Please click the
4.
Reboot/Finish button to make your configuration take effect and finish the Quick Setup.
3.2.2 Configuration for WISP Client Router Mode
When you choose WISP Client Router on Working Mode page in Figure 3-6 , take the following
steps:
1. Click Next, and then WAN Connection Type page will appear as shown in Figure 3-15.
TL-WR843N 300Mbps Wireless AP/Client Router User Guide
Figure 3-14 Quick Setup – Finish
- 18 -