TP-Link TL-WR810N User Manual page 50

MTU Size - The default MTU size is "1480" bytes, which is usually fine. It is not

recommended that you change the default MTU Size unless required by your ISP.
Service Name/AC Name - The service name and AC (Access Concentrator) name

should not be configured unless you are sure it is necessary for your ISP. In most cases,
leaving these fields blank will work.
ISP Specified IP Address - If your ISP does not automatically assign IP addresses to

the Router during login, please click "Use IP address specified by ISP" check box and
enter the IP address provided by your ISP in dotted-decimal notation.
Detect Online Interval - The Router will detect Access Concentrator online at every

interval. The default value is "0". You can input the value between "0" and "120". The
value "0" means no detect.
Primary DNS/Secondary DNS - If your ISP does not automatically assign DNS

addresses to the Router during login, please click "Use the following DNS servers"
check box and enter the IP address in dotted-decimal notation of your ISP's primary
DNS server. If a secondary DNS server address is available, enter it as well.
Click the Save button to save your settings.
4. If your ISP provides BigPond Cable connection, please select BigPond Cable option. Then
you should enter the following parameters (Figure 4-13):
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 4-12 PPPoE Advanced Settings
- 35 -