Dhcp; Dhcp Settings - TP-Link TL-WR810N User Manual

MAC Address - The connected wireless station's MAC address

Current Status - The connected wireless station's running status, one of

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected
Received Packets - Packets received by the station

Sent Packets - Packets sent by the station

Configure - The button is used for loading the item to the Wireless MAC Filtering list.

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.

6.7 DHCP

Figure 6-15 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 6-15), DHCP Settings,
DHCP Client List and Address Reservation. Click any of them, and you will be able to configure
the corresponding function.

6.7.1 DHCP Settings

Choose menu "DHCP → DHCP Settings", and then you can configure the DHCP Server on the
page as shown in Figure 6-16. The Router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the Router in the LAN.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
- 144 -
STA-AUTH /