TP-Link TL-WR810N User Manual page 76

Modify - To modify or delete an existing entry.

To setup a virtual server entry:
Click the Add New... button, the next screen will pop-up as shown in Figure 4-43.
1.
2. Select the service port you want to use from the Common Service Port list. If the Common
Service Port list does not have the service that you want to use, type the service port
number or service port range in the Service Port box.
3. Type the IP Address of the computer in the IP Address box.
Select the protocol used for this application, either TCP, UDP, or All.
4.
Select the Enabled to enable the virtual server.
5.
6. Click the Save button.

Note:
If your computer or server has more than one type of available service, please select another
service, and enter the same IP Address for that computer or server.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
Click the Save button.
3.
Click the Enable/Disable All button to make all entries enabled/disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button to return the previous
page.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 4-43 Add or Modify a Virtual Server Entry
- 61 -