Firmware Upgrade; Factory Defaults - TP-Link TL-WR810N User Manual

300mbps wi-fi pocket router/ap/tv
Hide thumbs Also See for TL-WR810N:
Table of Contents

Advertisement

4.18.3 Firmware Upgrade

The page allows you to upgrade the latest version firmware to keep your router up-to-date.
New firmware is posted at
experiencing difficulties, there is no need to upgrade firmware, unless the new firmware supports
a new feature you need.
Note:
When you upgrade the router's firmware, you will lose current configuration settings, so make
1.
sure you backup the router's settings before you upgrade its firmware.
Make sure that your computer is connected to the Internet through the cable when you
2.
upgrade the firmware. To upgrade through wireless connection is not allowed.
Set your IP address as static IP before upgrading.
3.
To upgrade the router's firmware, follow these instructions:
1.
Download the latest firmware upgrade file from our website http://www.tp-link.com.
2.
Enter or select the path name where you save the downloaded file on the computer into the
File blank.
3.
Click the Upgrade button.
Firmware Version - Displays the current firmware version.
Hardware Version - Displays the current hardware version. The hardware version of the
upgrade file must accord with the current hardware version.
Note:
The firmware version must correspond to the hardware. The upgrade process takes a few minutes
and the Router will restart automatically when the upgrade is completed. It is important to keep
power on during the entire process. Loss of power during the upgrade could damage the Router.

4.18.4 Factory Defaults

This page allows you to restore the factory default settings for the router.
TL-WR810N
300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 4-91 Firmware Upgrade
www.tp-link.com
and can be downloaded for free. If the router is not
- 94 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents