TP-Link TL-WR810N User Manual page 42

Method One:
Step 1: Keep the WPS Status as Enabled and click the Add Device button in Figure 4-3, then
the following screen will appear.
Step 2: Choose "Press the button of the new device in two minutes" and click Connect.
Step 3: For the configuration of the wireless adapter, please choose "Push the button on my
access point or wireless router" in the configuration utility of the WPS as below, and
click Connect.
Step 4: Wait for a while until the next screen appears. Click OK to complete the WPS
configuration.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
Figure 4-4 Add A New Device
The WPS Configuration Screen of Wireless Adapter
- 27 -