TP-Link TL-WR810N User Manual page 203

Name (SSID) - The SSID of the AP.
•
Channel - The current wireless channel in use.
•
Mode - The current wireless mode which the Router works on.
•
Channel Width - The current wireless channel width in use.
•
MAC Address - The physical address of the Router, as seen from the WLAN.
•
Client Status - The status of Client.
•
WAN - This field displays the current settings or information for the WAN, you can configure

them in the Network > WAN page.
MAC Address - The physical address of the WAN port, as seen from the Internet.
•
IP Address - The current WAN (Internet) IP Address. This field will be blank or 0.0.0.0 if the
•
IP Address is assigned dynamically and there is no connection to the Internet.
Subnet Mask - The subnet mask associated with the WAN IP Address.
•
Default Gateway - The Gateway currently used by the Router is shown here. When you
•
use Dynamic IP as the connection Internet type, the Renew button will be displayed here.
Click the Renew Button to obtain new IP parameters dynamically from the ISP. And if you
have got an IP address, Release button will be displayed here. Click the Release button to
release the IP address the Router has obtained from the ISP.
DNS Server - The DNS (Domain Name System) server IP addresses currently used by the
•
Router.
Online Time - The time that you online. When you use PPPoE as WAN connection type,
•
the online time is displayed here. Click the Connect or Disconnect button to connect to or
disconnect from Internet.
Secondary Connection - Besides PPPoE, if you use an extra connection type to connect to

a local area network provided by ISP, then parameters of this secondary connection will be
shown in this area.
IP Address - The current WAN (Internet) IP Address. This field will be blank or 0.0.0.0 if the
•
IP Address is assigned dynamically and there is no connection to the Internet.
Subnet Mask - The subnet mask associated with the WAN IP Address.
•
Click the Release to delete the network parameters, and click the Renew button to obtaining
network parameters.
Traffic Statistics - The Router's traffic statistics.

Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port.
•
Received (Packets) - Traffic that counted in packets has been received out from the WAN
•
port.
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
- 188 -