Wireless Security - TP-Link TL-WR810N User Manual

When 11bg mixed mode is selected, only 11bg mixed wireless stations can connect to the
Router. It is strongly recommended that you set the Mode to 11bgn mixed, and all of
802.11b/g/n wireless stations can connect to the Router.

Note:
If 11bg mixed mode is selected in the Mode field, the Channel Width selecting field will turn
grey and the value will become 20M, which is unable to be changed.
Channel Width - Select any channel width from the pull-down list. The default setting is

automatic, which can automatically adjust the channel width for your clients.
Enable Wireless Radio - The wireless radio of the Router can be enabled or disabled to

allow wireless stations access. If enabled, the wireless stations will be able to access the
Router. Otherwise, wireless stations will not be able to access the Router.
Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the wireless

router will broadcast its name (SSID) on the air.
Be sure to click the Save button to save your settings on this page.

Note:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
Near the center of the area in which your wireless stations will operate.

In an elevated location such as a high shelf.

Away from the potential sources of interference, such as PCs, microwaves, and cordless

phones.
Away from large metal surfaces.

2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.

5.7.2 Wireless Security

Choose menu "Wireless → Wireless Security", and then you can configure the security
settings of your wireless network.
There are three wireless security modes supported by the Router: WPA/WPA2-Personal,
WPA/WPA2-Enterprise and WEP (Wired Equivalent Privacy).
TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
- 109 -