Table of Contents
Advertisement
3/4" DECORATIVE PANEL DIMENSIONS
For a more custom appearance, overlay panels may be
installed to give a flush appearance with surrounding
cabinets. The overlay panel must be 3/4" thick. Panel
attaches to included brackets to provide mounting to the
appliance door.
NOTE: We recommend that decorative panels have inside
corners and edges rounded or beveled by cabinet maker
to avoid sharp edges on the panels. Edges to be treated
should include the top, bottom and hinge side edges.
38"
10-11/16"
Grille Panel
Fresh Food
Panel
46-9/16"
Freezer Drawer
22-7/16"
Panel
IMPORTANT NOTE: Maximum total weight for the assembled panels:
Door panel – 67 lbs.
Grille Panel – 18 lbs.
WARNING
Door Trim Pinch Point Hazard
Improper installation can lead to a finger pinch
point hazard between the side door trim and the
cabinets when operating the door, especially
with children. To minimize this risk you must
follow the installation instructions for cabinet
dimensions, trim assembly, and door stop angle.
Design Guide - Flush Installation
CUSTOMIZATION BASICS:
Framed Or Overlay Panels, Custom
Handles and Accessory Kits
These refrigerators are designed to be customized with
decorative panels. Field installed custom door and grille
panels are required.
Side Panels
Side panels must be used whenever the sides of the
refrigerator will be exposed.
REFRIGERATOR LOCATION
• Do not install the refrigerator where the temperature
will go below 55°F (13°C). It will not run often enough
to maintain proper temperatures.
• Do not install the refrigerator where temperatures will
go above 100°F (37°C). It will not perform properly.
• Do not install the refrigerator in a location exposed to
water (rain, etc.) or direct sunlight.
• Install it on a floor strong enough to support it fully
loaded.
23
Advertisement
Table of Contents
