Indicator Lamps - Can-Am DS 250 Operator's Manual

CHOKE LEVER IN THE OFF POSITION
The full choke position is used for
lower engine temperature.
CHOKE LEVER IN THE FULL CHOKE
POSITION
The other positions between OFF and
FULL position, will be use depending
on the engine temperature.

7) Indicator Lamps

The indicator lamps are located in the
middle of the handlebar.
While reading this Operator's Guide, reminder that:
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
CONTROLS/INSTRUMENTS/EQUIPMENT
vmr2006-083-011_b
1. Reverse lamp (RED)
2. Neutral lamp (GREEN)
3. Engine temperature (RED)
Engine Temperature (RED)
This light turns on when the
ignition switch is turned ON and
remains on for approximately 1
second.
When this indicator light is
ON, it indicates the engine is
overheating.
If
to
TROUBLESHOOTING
NOTICE
off right after engine starting, stop
engine. See an authorized Can-Am
dealer. Do not use the vehicle until
repaired.
Reverse Lamp (RED)
Indicates the transmission is in
reverse position.
WARNING
_______________
engine overheats,
ENGINE OVERHEATS
If the light does not turn
refer
in
.
61