Indicator Lamps; Ignition Switch - Can-Am DS 250 Operator's Manual

vmo2006-014-025
TYPICAL — CHOKE LEVER IN THE
OFF POSITION
The full choke position is used for low-
er engine temperature.
vmo2006-014-026
TYPICAL — CHOKE LEVER IN THE
FULL CHOKE POSITION
The other positions between OFF and
FULL position, will be use depending
on the engine temperature.

7) Indicator Lamps

vmo2006-014-027
______________________
68
High intensity (Blue)
When this indicator light is
on, it indicates HIGH BEAM
is selected on the headlamps.
Engine Temperature/Oil
Pressure Lamp (red)
This light
the ignition switch is turned
ON and
engine is running. When this
indicator light is ON, it indicates
the engine
If engine
to ENGINE
SPECIAL PROCEDURES.
Forward Lamp (blue)
When lit,
transmission
position.
Reverse Lamp (red)
When lit,
transmission
position.
Neutral Lamp (green)
When lit,
transmission
position.
Direction Indicator (green)
When the indicator light blinks,
it indicates which direction
indicator, left or right, is in
operation.

8) Ignition Switch

Key-operated, 2-position switch: OFF,
ON.
turns on when
remains on until
is overheating.
overheats, refer
OVERHEAT
it indicates the
is in forward
it indicates the
is in reverse
it indicates the
is in neutral
in