Table of Contents
Advertisement
Main Functions
1.19 INFORMATION DISPLAY
Operation
Features
Note
48
Set temperature
After pressing the [INFO] button, point the remote controller at the indoor unit for 2 seconds.
Every time you press the [INFO] button, room temperature, indoor humidity, and outdoor
temperature are displayed.
Outdoor temperature during operation may be displayed relatively high in "SARARA"
DRYING or COOLING, and relatively low in HEATING (particularly when the outdoor unit is
frosted) by influence of air blown out from the outdoor unit and the temperature of the
outdoor heat exchanger.
Lowest displayable outdoor temperature is –9°C. Even if the outdoor temperature is lower
than this, -9 is displayed. Highest displayable outdoor temperature is 39°C. Even if the
outdoor temperature is higher than this, 39 is displayed.
Displayed temperature and humidity are those near the sensor.
Displayed temperature or humidity may be different from the actual temperature or humidity
depending on the conditions of indoor unit and outdoor unit installation (due to obstacle near
the sensor or influence of direct sunlight).
INFORMATION
Room temperature
Outdoor
Indoor humidity
temperature
SiBE04-624_B
Return to
normal
display
(R13901)
Function and Control
Advertisement
Table of Contents
