Mold Shock Out Operation - Daikin SiBE04-624_B_FTXR-E Service Manual

SiBE04-624_B

1.18 MOLD SHOCK OUT Operation

The room is kept clean by removing excessive moisture by rapidly lowering the humidity in the
room for 1 hour, and keeping operation for 2 hours (total 3 hours).
Operation It is not self-starting operation.
Features
Generation of mold is prevented by sudden drying of humid environment. It is generally said that
the growth of mold can be prevented by lowering the humidity to half and continuing the
operation for 3 hours.
The test was conducted at DAIKIN's laboratory with use of the
mold sensor of Environmental Biological Research Institute.
Operation
Indoor Fan
Room Temperature
Reheating dehumidifying
room temperature setting
Airflow direction
Compressor
<Note> The room temperature becomes lower by about 5˚C than the temperature at the start of operation.
Function and Control
Dry shock method
Before MOLD SHOCK OUT
operation
Time chart
• Operation runs about for 3 hours in total while changing colors of the multi-colored
indicator lamp.
• Reheating dehumidifying which dehumidifies continuously.
ON
OFF
Initial setting for reheating
dehumidifying

MOLD SHOCK OUT Operation

(Hold down for 2 seconds.)
Without MOLD SHOCK OUT
operation
Fewer molds grow as compared with the case
of without MOLD SHOCK OUT Operation.
Approx. 3 hours
<Airflow rate in reheating dehumidifying>
<Angle in comfort airflow mode>
Main Functions
(R13895)
With MOLD SHOCK OUT
operation
(R13897)
Continuous operation in
max. frequency
(R18332)
45