Output Power Level Selection; Priority A Channel Selection - Icom IC-F4100D Series Instruction Manual

■ Output power level selection

If the transceiver has [High/Low] assigned to it, the transmit output
power level can be selected, depending on the presetting.
When the battery case is selected as the battery type, or the bat-
tery voltage drops to a low power level and the LED indicator sta-
tus is "Low Battery 2," the output power automatically switches to
"Low 1." (pp. 7, 12)
➥ Push [High/Low] to select the transmit output power level.
• One beep sounds when "Low 1" is selected.
• Two beeps sound when "Low 2" is selected.
• Three beeps sound when "High" is selected.

■ Priority A channel selection

When one of the following operations is performed, the transceiver
automatically selects the Priority A channel.
• Turning the power ON
The Priority A channel is selected each time the transceiver pow-
er is turned ON.
• Auto reset
The Priority A channel is selected when the Auto Reset timer
ends.
BASIC OPERATION
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22