Removing The Processor Heat Sink; Replacing The Processor Heat Sink - Dell Inspiron 1545 Service Manual

Hide thumbs Also See for Inspiron 1545:
Table of Contents

Advertisement

Back to Contents Page
  Processor Heat Sink
Dell™ Inspiron™ 1545 Service Manual 
  Removing the Processor Heat Sink
  Replacing the Processor Heat Sink
 
CAUTION:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
as a connector on the back of the computer).
NOTICE:
computer.
NOTICE:
covered by your warranty.
 Removing the Processor Heat Sink
 
1. Follow the instructions in
 
2. Remove the base cover (see
 
3. Loosen the five captive screws that secure the processor heat sink to the system board.
1
captive screws (5)
 
4. Lift the processor heat sink away from the computer.
 Replacing the Processor Heat Sink
NOTE:
The original thermal cooling pad can be reused if the original processor and processor heat sink are reinstalled together. If either the processor
or processor heat sink is replaced, use the thermal cooling pad provided in the kit to ensure that thermal conductivity is achieved.
NOTE:
This procedure assumes that you have already removed the processor heat sink and are ready to replace it.
 
1. Peel the backing off the thermal cooling pad and adhere the pad to the portion of the heat sink that covers the processor.
 
2. Place the processor heat sink on the system board.
 
3. Tighten the five captive screws that secure the processor heat sink to the system board.
 
4. Replace the base cover (see
 
5. Slide the battery into the battery bay until it clicks into place.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
To help prevent damage to the system board, remove the main battery (see
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not 
Before You
Begin.
Removing the Base
2
processor heat sink
Replacing the Base
Cover).
UserManuals.info
Before Working Inside Your
Cover).
Computer) before working inside the

Advertisement

Table of Contents
loading

Table of Contents