Solid State Drive; Removing The M.2 2230 Solid-State Drive; Replacing The Ssd Support Bracket - Dell P118G Service Manual

NOTE: If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Connect the battery cable.
2. Install the base cover.
3. Follow the procedure in

Solid state drive

Removing the M.2 2230 solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Disconnect the battery
About this task
The figure indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal
procedure.
Steps
1. Remove the single (M2x3) screw that secures the solid-state module to the palmrest assembly.
2. Slide the solid-state module out from the M.2 slot.

Replacing the SSD support bracket

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Disconnect the battery
After working inside your
Before working inside your
cable.
Before working inside your
cable.
computer.
computer.
computer.
Disassembly and reassembly 35