Storage; Cleaning - Dexcom SEVEN PLUS User Manual

9
9.2

STORAGE

Sensor
Keep the Sensor in its sterile packaging until you are ready to use it.
•
• Check the expiration date on the Sensor. The expiration date format is YYYY-MM-DD. Sensors
must be inserted on or before the end of the calendar day printed on the Sensor package label.
Storage Temperature should be 36°-77° F (2°-25° C) for the length of its shelf life. You may store
•
your Sensors in the refrigerator if it is within this temperature range.
Transmitter
Keep the Transmitter clean and protected when not in use.
•
Transmitter Warranty is 1 year.
•
Storage Temperature should be 32°- 113° F (0°- 45° C).
•
Receiver
Keep the Receiver clean and protected when not in use.
•
Receiver Warranty is 1 year.
•
Storage Temperature should be 32°- 113° F (0°- 45° C).
•
Store at Humidity levels between 10-85% Relative Humidity.
•
9.3

CLEANING

Cleaning the Receiver (Single-patient Use):
1. Wipe the outside of the Receiver with a dry or wrung-out, slightly damp cloth.
2. The Receiver is not waterproof. Do not use a soaking wet cloth.
3. Disinfect with an Isopropyl alcohol wipe if desired.
4. Do not use soap, nail polish remover, or paint thinner. Only use Isopropyl alcohol and water.
Cleaning the Transmitter (Single-patient Use):
1. Wipe the Transmitter clean with a wet cloth or Isopropyl alcohol wipe between uses.
2. The Transmitter is water resistant when snapped into the Sensor Pod, but do not soak the Transmitter
in liquid.
3. Do not use soap, nail polish remover, or paint thinner. Only use Isopropyl alcohol
and water.
104 | SEVEN PLUS Continuous Glucose Monitoring System