Setting Your Alerts; Factory Alert Settings - Dexcom SEVEN PLUS User Manual

2.3

SETTING YOUR ALERTS

2.3.1

FACTORY ALERT SETTINGS

The SEVEN PLUS' Alerts arrive from the factory with the following "default"
settings. These default Alert Settings are provided in the below table:
Alert Type
High Alert
Low Alert
Rise Alert
Fall Alert
Other Alert
(See Chapter
11, Appendix 1
for a detailed
list of all
"Other Alerts.")
Out of
Range Alert
Default Default Prompt
Settings Sound/
Vibrate
200 Vibe then Beep
mg/dL (vibrate first, then
2 high beeps and
vibrate)
80 mg/dL Vibe then Beep
(vibrate first, then
3 low beeps and
vibrate)
Off Disable (None)
Off Disable (None)
On Vibe then Beep
(Vibrate first, then
medium beep tone)
Off Disable (none)
SEVEN PLUS User's Guide
Default
Re-alert
Setting
None
(no re-alerts after
pressing button)
None
(no re-alerts after
pressing button)
None
(no re-alerts after
pressing button)
None
(no re-alerts after
pressing button)
Depends on the Alert
Type
(See Chapter 11,
Appendix 1).
Continues to
re-alert you until you
come back into range.
| 35