Setting Glucose Alerts - Dexcom SEVEN PLUS User Manual

2
You can change the factory Alert Settings at any time by going to the Alerts Menu. You can
reach the Alerts Menu by following these steps:
1. Press any button to turn on the Receiver display.
2. Press the button to reach the Menus.
OK
3. Use the Up p and Down q Arrow buttons to scroll until you
highlight "Alerts."
4. Press the button to go into the Alerts Menu.
OK
5. Use the Up p and Down q Arrow buttons to scroll through the Alerts:
a. High Alert b. Low Alert
d. Fall Rate e. Other Alerts
6. Highlight the Alert you want, and press the
Sections 2.3.2 – 2.3.4 will show you how to set these Alerts.
2.3.2

SETTING GLUCOSE ALERTS

High Alert, Low Alert, Rise Rate, and Fall Rate Alerts (Chapter 5, Section 5.3, "Glucose Alerts
and ALARM") provide information about your glucose levels and trends.
The following steps show how to change the High Alert, Low Alert, Rise Rate, and Fall Rate
Alerts settings.
1. Select the Alert you want as described in 2.3.1, "Factory Alert Settings."
2. Use the Up p and Down q Arrow buttons to scroll to the type of Alert notification you want
to receive:
a. Vibrate then Beep (the first alert will vibrate, then every 5 minutes the Alert will vibrate and
beep)
i. High Alert sound
ii. Low Alert sound
iii. Rise Rate sound
iv. Fall Rate sound
36 | SEVEN PLUS Continuous Glucose Monitoring System
c. Rise Rate
f. Out of Range
button.
OK
= 2 high tone beeps
= 3 low tone beeps
= 2 high tone beeps
= 3 low tone beeps